20060303-partial

1 files changed, 411 insertions, 0 deletions

diff --git a/man/10/9load b/man/10/9load
new file mode 100644
index 00000000..b1c696c3
--- /dev/null
+++ b/man/10/9load
@@ -0,0 +1,411 @@
+.TH 9LOAD 10.8
+.SH NAME
+9load, ld, 9pxeload \- PC bootstrap program
+.SH SYNOPSIS
+.I "(Under MS-DOS)
+.br
+[
+.I drive
+:][
+.I path
+.RB ] ld
+[
+.I 9load
+]
+.SH DESCRIPTION
+On the PC, bootstrap programs from Plan 9 are used to boot Inferno as well
+(hence the naming convention).
+.I 9load
+and
+.I ld
+are programs that reside in a FAT file system and bootstrap Inferno.
+.I 9load
+loads the kernel, but it cannot be run from DOS; use
+.I ld
+to bootstrap (by starting
+.IR 9load )
+if DOS is running.
+.I 9load
+is run automatically by the boot procedures described below;
+it cannot be run directly by hand.
+There are three bootstrap sequences:
+.IP \-
+BIOS, MBR, disk partition PBS,
+.IR 9load ,
+kernel
+.IP \-
+BIOS, floppy PBS,
+.IR 9load ,
+kernel
+.IP \-
+BIOS, MBR, DOS,
+.IR ld ,
+.IR 9load ,
+kernel.
+.PP
+Details follow.
+.PP
+.I 9load
+is a bootstrap program that loads and starts a program,
+typically the kernel, on a PC.
+It is run by the PC partition boot sector program (PBS),
+which usually resides in the first
+sector of the active partition.
+A copy of the Plan 9 PBS is kept in
+.BR /Inferno/386/pbs ,
+but due to the ``cylinder-head-sector'' (CHS) addressing mode of old BIOSes, it can only
+operate up to 8.5GB into the disk.
+Plan 9 partitions further into the disk
+can only be booted using
+.BR /Inferno/386/pbslba ,
+and then only if the machine's BIOS supports
+linear block addressing (LBA) mode for disk transfers.
+.PP
+When booting from floppy or hard disk, the BIOS loads the
+first sector of the medium at location 0x7C00.  In the
+case of a floppy, this is the PBS.  In the case of a hard
+disk it it the master boot record (MBR).
+The MBR copies itself to address
+.BR 0x600 ,
+finds the active partition and loads its PBS at address
+.BR 0x7C00 .
+A copy of the Plan 9 MBR is kept in
+.BR /Inferno/386/mbr ;
+some commercial MBRs cannot read sectors
+past 2GB.
+The Plan 9 MBR can read sectors up to 8.5GB into
+the disk, and further if the BIOS supports LBA.
+The single file
+.B /Inferno/386/mbr
+detects whether the BIOS supports LBA and
+acts appropriately, defaulting to CHS mode
+when LBA is not present.
+The PBSs cannot do this due to code size considerations.
+The Plan 9 MBR is suitable for booting non-Plan 9
+operating systems,
+and (modulo the large disk constraints just described)
+non-Plan 9 MBRs are suitable for booting Plan 9.
+.PP
+Thus the default sequence is: BIOS, MBR, PBS,
+.IR 9load ,
+kernel.
+.PP
+Because it contains many device drivers for different
+disks and networks,
+.I 9load
+is larger than 64K and cannot be run as a DOS
+.RB `` .com ''
+executable.
+A stripped-down version that knows about disks but not networks,
+called
+.I ld
+(really
+.BR ld.com ),
+fits in 64K and can be used under DOS to load and start a program (default
+.IR 9load )
+from the FAT16 partition.
+Its command line argument is of the same format as the
+.I bootfile
+specifiers described below.
+This profusion of loaders is unfortunate, but at least
+.I ld
+and
+.I 9load
+are compiled from the same source.
+.PP
+.I 9load
+begins execution at address
+.B 0x80010000
+(64K) and
+loads the
+.I bootfile
+at the entry address specified by the header,
+usually
+.BR 0x80100020 .
+After loading, control is passed to the entry location.
+.PP
+Finally,
+.I 9pxeload
+is a version of
+.I 9load
+that can be booted using the PXE download
+found on some ethernet card BIOSs.
+.PP
+In summary,
+Inferno and Plan 9 can be booted on a PC three different ways:
+either by booting MS-DOS and using
+.I ld
+to start
+.I 9load
+in the appropriate directory,
+by booting directly from an Inferno/Plan 9 boot floppy or disk
+partition
+prepared using
+.B format
+to install the appropriate files and bootstrap sectors
+(see
+.IR prep (8)),
+or by using a PXE capable BIOS to boot
+.I 9pxeload
+directly over the ethernet.
+.PP
+The
+.IR bootfile ,
+which may be compressed with
+.IR gzip (1),
+can be specified to
+.I 9load
+as a
+.B bootfile=
+entry in
+.IR plan9.ini ,
+or if booting from the ethernet, by a BOOTP server.
+If the
+.B plan9.ini
+file contains multiple
+.B bootfile=
+entries,
+.I 9load
+will present a numerical menu of the choices; type
+the corresponding number to select an entry.
+.PP
+The format of the
+.I bootfile
+name is
+.IB device ! file
+or
+.IB device ! partition ! file\f1.
+If
+.BI ! file
+is omitted, the default for the particular
+.I device
+is used.
+Supported
+.I devices
+are
+.TF \fLethern
+.TP
+.BI fd n
+An MS-DOS floppy disk.
+.I N
+specifies the floppy drive, either
+0 or 1.
+The
+.I bootfile
+is the contents of the MS-DOS
+.IR file .
+There is no default file.
+For compatibility with hard disks, a
+.I partition
+may be given, but only
+.B dos
+is recognized:
+.BI fd0!dos! file\f1.
+.TP
+.BI ether n
+Ethernet.
+.I N
+specifies the Ethernet device number.
+If a
+.I partition
+is specified, it is taken to be the name of a host machine
+from which to load the kernel.
+.I file
+is determined by the
+.B /lib/ndb
+(see
+.IR ndb (6))
+entry for this PC.
+.TP
+.BI sd Cn
+Non-floppy disk.
+The device name format is described in
+.IR sd (3).
+A
+.I partition
+must be given and must
+name a partition containing a FAT file system.
+The name
+.B dos
+refers to the first DOS partition on a given device.
+It is common for Inferno/Plan 9 partitions to contain a small
+FAT file system for configuration.
+By convention, this partition is called
+.BR 9fat .
+There is no default partition or pathname.
+.PD
+.PP
+When
+.I 9load
+starts running at physical address 0x10000,
+it switches to 32-bit mode.
+It then double maps the first 16Mb of physical memory to
+virtual addresses 0 and 0x80000000.
+Physical memory from 0x300000 upwards is used as data
+space.
+Next, in order to find configuration information,
+.I 9load
+searches all units on devices
+.BR fd
+and
+.BI sd Cn \fR,
+in that order, for a file called
+.B plan9\eplan9.ini
+or
+.B plan9.ini
+(see
+.IR plan9.ini (10.6))
+on a partition named
+.B dos
+or 
+.BR 9fat .
+If one is found, searching stops and the file is read into memory
+at physical address 0x1200
+where it can be found later by any loaded
+.IR bootfile .
+Some options in
+.B plan9.ini
+are used by
+.IR 9load :
+.TF bootfile=manual
+.TP
+.B console
+.TP
+.B baud
+Specifies the console device and baud rate if not a display.
+.TP
+.BI ether n
+Ethernet interfaces. These can be used to load the
+.I bootfile
+over a network.
+Probing for Ethernet interfaces is too prone to error.
+.TP
+.BI bootfile= bootfile
+Specifies the
+.IR bootfile .
+This option is overridden by a command-line argument.
+.TP
+.B bootfile=auto
+Default.
+.TP
+.B bootfile=local
+Like
+.IR auto ,
+but do not attempt to load over the network.
+.TP
+.B bootfile=manual
+After determining which devices are available for loading from,
+enter prompt mode.
+.PD
+.PP
+When the search for
+.B plan9.ini
+is done,
+.I 9load
+proceeds to determine which bootfile to load.
+If there was no
+.I bootfile
+option,
+.I 9load
+chooses a default
+from the following prioritized device list:
+.EX
+	fd sd ether
+.EE
+.I 9load
+then attempts to load the
+.I bootfile
+unless
+the
+.B bootfile=manual
+option was given, in which case prompt mode is entered immediately.
+If the default device is
+.BR fd ,
+.I 9load
+will prompt the user for input before proceeding with the
+default bootfile load after 5 seconds;
+this prompt is omitted if
+a command-line argument or
+.I bootfile
+option
+was given.
+.PP
+.I 9load
+prints the list of available
+.IR device s
+and
+enters prompt mode on encountering any error
+or if directed to do so by a
+.B bootfile=manual
+option.
+In prompt mode, the user is required to type
+a
+.IB bootfile
+in response to the
+.L "Boot from:
+prompt.
+.PP
+.I 9load
+parses the master boot record and Plan 9 partition tables
+(see
+.IR prep (8)),
+leaving partitioning information appended to the
+in-memory contents of
+.I plan9.ini
+for the
+.IR bootfile .
+This is used by
+.IR sd (3)
+to initialize partitions so that a
+file system in a partition can be found and mounted as the root file system.
+A more extensive partitioning is typically done by system initialisation in
+.B osinit.dis
+(see
+.IR root (3)).
+.PP
+A
+control-P
+character typed at any time on the console causes
+.B 9load
+to perform a hardware reset
+(Ctrl-Alt-Del can also be used on a PC keyboard).
+.PP
+When loaded from a PBS (rather than from
+.IR ld.com ),
+.I 9load
+must be contiguously allocated on
+the disk.
+See 
+.IR dossrv (4)
+for information on ensuring this.
+.SH FILES
+.RI [ drive :]
+[
+.I path
+.RB ] 9load
+.br
+.RI [ drive :]
+[
+.I path
+.RB ] ld
+.br
+.IB "FAT filesystem" :\eplan9\eplan9.ini
+.br
+.IB "FAT filesystem" :\eplan9.ini
+.SH SOURCE
+.B /os/boot/pc
+.SH "SEE ALSO"
+.IR plan9.ini (10.6),
+.IR prep (8)
+.SH BUGS
+Much of the work done by
+.B 9load
+is duplicated by the loaded kernel.
+.PP
+If
+.I ld
+detects an installed MS-DOS Extended Memory Manager,
+it attempts to de-install it, but the technique
+used may not always work.
+It is safer not to install the Extended Memory Manager before running
+.IR ld .